Skip to content
HSCAM

Company

Engineers by passion.

HSCAM GmbH designs and builds highly customizable Smart Industrial High-Speed Camera Systems in Leipzig, Germany — because every application has its own challenges. Cameras built to stream continuously, unattended, with measurement data captured on the same clock as every frame.

Talk to an engineer See the products

Who we are

Continuous streaming, not short bursts

Most high-speed cameras record a short, buffered burst to on-board memory, then need a slow offload before they can record again. HSCAM builds the opposite: cameras that stream continuously over standard interfaces, so an unpredictable event — a jam, a fault, a bad cut — doesn't need to be anticipated in advance to be captured.

The HSCAM STREAMER family does this today, in a real industrial deployment: a rolling mill recording every cut and every jam on a 140 m/s wire line, 24/7, with a week or more of triggered recordings kept on the installation's storage.

HSCAM NANO, currently in prototyping and evaluation, takes the same idea a step further — processing images directly on the sensor, so results can leave the camera before a full frame ever would.

What we build

Two products, two stages

Shipping today

HSCAM STREAMER 1M13

Continuous, unattended high-speed streaming over USB 3.0, with synchronized analogue and digital measurement channels.

View product
Prototype — ready for pilot projects

HSCAM NANO

A Vision System on Chip (VSoC) that processes images on the sensor chip — built on chip technology invented by Fraunhofer IIS.

View product
Two HSCAM camera housing form factors together, studio photograph.

Partnership

Built on patented VSoC technology from Fraunhofer IIS

HSCAM NANO's Vision System on Chip (VSoC) — the sensor and processors on a single die — is patented technology invented by Fraunhofer IIS. The camera's Edge AI (microcontroller and neural processing unit) is HSCAM's own addition; HSCAM designs the camera and system around the VSoC.

Origin

Born from a joint development

HSCAM STREAMER was developed jointly by tecVenture GmbH, GS Vitec GmbH and M.Rick Engineering. HSCAM GmbH's role is bringing that work to market — sales, support and deployment of what the development partnership builds. New development, including HSCAM NANO, still runs through tecVenture and M.Rick Engineering — currently NANO driver projects and further STREAMER customization projects.

tecVenture logo Visit tec-venture.de
GS Vitec logo
Visit gsvitec.com

M.RICK Engineering

Visit mrick.de

Trade fairs

On the show floor

HSCAM exhibits at machine-vision trade fairs — here at Messe Vision, demonstrating synchronized multi-camera capture live on the booth.

HSCAM's own booth at the Messe Vision trade fair, showing the punching-ball demonstration rig and an HSCAM representative beside it.

References

Organizations using or working with HSCAM camera systems

  • Fraunhofer IIS
  • Fraunhofer IPA
  • ArcelorMittal
  • ZEISS
  • ETH Zürich
  • Krautzberger
  • ELWI
  • SMS group
  • GMH Group
  • Viimagic

Legal entity

HSCAM GmbH

Location

Angerstraße 40–42, Haus B
04177 Leipzig, Germany

Contact

contact@hscam.com
hscam.com

Partner with HSCAM

Tell us your imaging or measurement requirement, or ask about early evaluation of HSCAM NANO.

Helpful, but not required

  • What your process does and what goes wrong, or what you cannot see today
  • Speed or cycle time, if you know it
  • Measurement or trigger signals that exist on the machine
  • Environment: temperature, lighting, mounting space
HSCAM GmbH · Angerstraße 40–42, Haus B · 04177 Leipzig, Germany
contact@hscam.com · hscam.com

* Required

Frame rate and image area still unknown? Just describe the sequence – we help with the design.

Your details are sent to HSCAM to answer this enquiry only — see our privacy notice, which also covers the Cloudflare spam check below. If you arrived through a campaign link, its utm_ parameters and the page you are on are sent with your enquiry.

Sent straight to contact@hscam.com.